Epson TM-U675 - Pre-Assembly of the N. E. Detector Assembly

Rev.D Assembly and Disassembly 2-95
TM-U675/U675P (with autocutter) Service Manual
Confidential
Pre-assembly of the N. E. Detector Assembly
1. Attach the hexagon lock screw to the N. E. detector holder.
2. Attach the N. E. detector lever to the N. E. detector holder. Check how the lever moves two
to three times.
3. Fix the micro switch to the N. E. detector holder with one screw. Attach in the direction
shown in the figure.
Figure 2-96
119 Micro switch
118 Screw (C.B.B-tite, 2X8)
117 N.E. detector lever
116
N.E. detector holder
120 Hexagon nut