Rev.D Product Overview Appendix D-23
TM-U675/U675P (with autocutter) Service Manual
Confidential
Roll paper release operation
The roll paper release operation lets you remove pieces of roll paper that still remain when you
are replacing roll paper. You can use this when there are paper jams or when you are removing
pieces of paper.
The paper is released by operating the release lever beside the paper feed motor on top of the
paper feed unit. The end of the release lever is located very near the paper hold roller. When
you push the part of the lever labeled "PUSH" in the direction indicated by arrow b, the paper
hold roller on the paper hold roller shaft is moved in the direction indicated by arrow a,
releasing the connection with the paper feed roller, releasing any paper in between.
Figure D-32
Roll paper
Release lever
Paper release lever shaft
Paper hold roller spring
aper hold roller spring
Paper hold roller
Paper feed roller
Paper hold roller shaft
Paper feed roller shaft
Paper feed frame
PUSH
b
a
To Next Page
Loading...
