Epson TM-U675 - Assembly of the TM-U675

2-96 Assembly and Disassembly Rev.D
Confidential
Assembly of the TM-U675
1. Attach the main circuit board unit to the main plate sub assembly with six screws.
Note:
Components mounted on the main circuit board unit differ according to the configuration. Use the
main circuit board that is appropriate for your configuration.
2. Attach the strengthening plate B to the main plate sub assembly with three screws.
Figure 2-97
133
Main plate sub assembly
106 Screw (C.B.S-tite F, 3X6)
135 Strengthening plate
107
Screw (C.P.S-tite(0), 3X6)
107
Screw (C.P.S-tite(0), 3X6)
107
Screw (C.P.S-tite(0), 3X6)
107
Screw (C.P.S-tite(0), 3X6)
201
Main circuit board unit