Epson TM-U675 - Removing the Print Head Unit; Removing the Print Head Unit FPC; Slit and Two Nibs

Rev.D Troubleshooting 1-17
TM-U675/U675P (with autocutter) Service Manual
Confidential
5. Move the head carriage to the right side and remove the print head unit flexible plastic cable
(FPC) from the connector.
Figure 1-10 Removing the print head unit FPC
6. Remove the screw and remove the print head unit.
Figure 1-11 Removing the print head unit
When attaching, pass the print head unit FPC through the slit in the head carriage and attach
below the two nibs.
Figure 1-12 Slit and two nibs
two nibsslit