Rev.D Assembly and Disassembly 2-15
TM-U675/U675P (with autocutter) Service Manual
Confidential
Pre-assembly of the Carriage Assembly
1. Insert the oil rings into the carriage assembly and lubricate. When doing so, insert the flat
surface of the oil rings so that they are facing up and down.
2. Hook the carriage spring to the carriage assembly. Push in until you feel the carriage spring
click.
Figure 2-14
O-10
O-10
611 Carriage spring
Rounded side
709
Carriage assembly
605
Oil ring
To Next Page
Loading...
