Rev.D Product Overview Appendix D-31
TM-U675/U675P (with autocutter) Service Manual
Confidential
The ribbon take-up gear has an internal one-way clutch, preventing it from rotating in the
direction indicated by arrow G and this, in turn, prevents ribbon slack. (See Figure D-39.)
Figure D-39
MICR Mechanism (Factory Option)
The MICR unit is comprised of the following parts (See Figure D-40.):
❏
MICR head
❏
MICR frame
❏ MICR lever
❏
MICR fixing
❏
MICR solenoid
The MICR unit is located in the slip paper path.
B
F
C
D
G
E
A
Transmission gear
Ribbon reduction gear
Ribbon take-up shaft
Carriage transmission
pulley
Ribbon take-up gearRibbon intermediate gear
Ribbon drive plate
Ribbon drive gear
To Next Page
Loading...
