Appendix D-20 Product Overview Rev.D
Confidential
Take-up operation
The take-up drive force for the printed roll paper is supplied by the paper feed motor, and is
sequentially transmitted to the take-up shaft by the paper feed transmission gear, J/S change
gear, paper feed reduction gear, take-up drive gear, take-up belt, take-up pulley, take-up clutch,
and take-up gear. (See Figure D-29.) Take-up force is transmitted to the take-up shaft by the
movement of the take-up clutch spring between the take-up pulley and take-up gear. This
rotates the take-up shaft in the direction indicated by arrow a, winding up the printed paper roll.
Figure D-29
Take-up shaft
Take-up belt
Take-up drive gear
Paper feed
reduction gear
J/S change gear
Paper feed
transmission gear
Paper feed motor gear
Take-up pulley
(Take-up clutch)
Take-up gear
Take-up frame
a
To Next Page
Loading...
