Appendix D-74 Product Overview Rev.D
Confidential
DIP Switch 2
Table D-19 DIP switch 2 settings
Switch No. Function ON OFF
1 Handshake operation (BUSY condition) Receive buffer full Offline or receive buffer full
2 Customer display (DM-D) connection Connected Not connected
3 Printing line count selection Multi Standard
4 TM-U375 print width compatibility mode Compatible Not compatible
5 Used internally - Fixed to OFF
6 Used internally - Fixed to OFF
7 Pin 6 reset signal Enabled Disabled
8 Pin 25 reset signal Enabled Disabled
Table D-20 TM-U375 print width compatibility mode settings
SW2-4 SW2-3 Font/Character Dot Spacing Printing Line Count Total No. of Dots
ON OFF 5 x 9/1 dot 33 lines 400 half dots
7 x 9/3 half dots 40 lines
ON 5 x 9/1 half dots 35 lines 385 half dots
7 x 9/2 half dots 42 lines
To Next Page
Loading...
