Epson TM-U675 - Pre-Assembly of the Slip B.O.F. Detector Assembly

Rev.D Assembly and Disassembly 2-3
TM-U675/U675P (with autocutter) Service Manual
Confidential
Pre-assembly of the Slip B.O.F. Detector Assembly
1. Solder lead wires C, D, E to the slip B. O. F. detector assembly.
2. Insert the slip B. O. F. detector assembly into the slip insertion detector holder.
Figure 2-2
606 Slip insertion detector holder
696 Slip B.O.F. detector assembly
742 Lead wire (type C)
743 Lead wire (type D)
744 Lead wire (type E)