Appendix D-24 Product Overview Rev.D
Confidential
Specifically, the release lever is provided by the paper feed motor and very near the paper hold
roller shaft to remove paper that interferes with the contact between the paper hold roller and
paper feed roller. When you push the part of the release lever labeled “PUSH” in the direction
indicated by arrow b, the release lever rotates around the pivot in the direction of arrow c, and
the end of the release lever pushes out the end of the paper hold roller shaft in the direction
indicated by arrow a. After the paper is released, the paper hold roller and release lever are
returned to their original positions by two paper hold roller springs built into both ends of the
paper hold roller shaft
.
Figure D-33
b
a
Roll paper
Roll paper
Paper feed frame
Release lever
pivot point axis
Release lever
aper hold roller
Paper hold
roller axis
Paper hold roller spring
"PUSH"
c
To Next Page
Loading...
