Epson TM-U675 - Page 117

Rev.D Assembly and Disassembly 2-83
TM-U675/U675P (with autocutter) Service Manual
Confidential
63. Pass intermediate cables A, B, C through the hole in the main frame. Attach the carriage
frame unit to the main frame with four screws. Fit the nibs in the carriage frame unit to the
main frame notches.
Note:
Check that the carriage assembly moves smoothly and that the ribbon drive plate assembly moves
smoothly with the carriage assembly.
Figure 2-83
726
Screw (C.B.S-tite F, 3X6)
726
Screw (C.B.S-tite F, 3X6)
734 Intermediate cable (type A)
735 Intermediate cable (type B)
736 Intermediate cable (type C)
Main frame
Hole