Epson TM-U675 - Page 123

Rev.D Assembly and Disassembly 2-89
TM-U675/U675P (with autocutter) Service Manual
Confidential
77. Solder the lead wires of the paper end detector assembly to the main circuit board assembly.
Note:
See Figure 2-93 on page 2-93 and Table 2-1 for details on where to solder.
78. Lubricate the areas shown in the illustration.
Figure 2-89
G-36
G-36
G-36
G-36
G-36
G-48
G-36