Rev.D Assembly and Disassembly 2-113
TM-U675/U675P (with autocutter) Service Manual
Confidential
34. Attach the corresponding cover plate sub assemblies to the left and right sides of the cover
frame sub assembly (two screws).
35. Insert the coil unit of the right and left hook springs onto the shafts of the cover frame sub
assembly and hang the hooks on the slits in the cover frame sub assembly. Hang the other
ends of the right and left hook springs on the grooves of the right and left hook buttons and
attach the right and left hook buttons to the shafts with two E-rings.
Figure 2-114
102 Screw (C.B.S-tite F, 3X4)
groove
shaft
slit
102 Screw (C.B.S-tite F, 3X4)
175 Cover frame sub assembly
177 Left cover plate sub assembly
176 Right cover plate sub assembly
173
Left hook spring
172 Right hook spring
170 Right hook button
163 E-ring (3)
163 E-ring (3)
169 Left hook button
shaft
hook
To Next Page
Loading...
