Epson TM-U675 - Page 67

Rev.D Assembly and Disassembly 2-33
TM-U675/U675P (with autocutter) Service Manual
Confidential
9. Attach the paper feed roller to the paper feed frame assembly.
10. Attach the crank shaft holder, parallel pin, and the paper feed gear to the paper feed roller
with two E-rings.
11. Lubricate the sliding parts of the paper feed roller and crank shaft holder.
12. Attach the paper feed gear to the axis shown in the figure for the paper feed frame assembly
with one E-ring.
Figure 2-33
666
Paper feed roller
722 E-ring (4)
730 Crank shaft holder
648 Paper feed gear
648 Paper feed gear
722 E-ring (4)
722 E-ring (4)
602
G-48
G-48
666
Paper feed roller
602 Parallel pin (1.6X10)
730
Crank shaft holder