Rev.D Assembly and Disassembly 2-39
TM-U675/U675P (with autocutter) Service Manual
Confidential
28. Attach the cover ground plate to the paper feed frame assembly.
29. Cover the paper feed frame assembly using the paper feed cover and tighten the two plate
assembly lever screws.
30. Hang the assist paper guide spring onto the paper feed frame cover. Check the operation of
the assist paper guide.
31. Insert the paper release lever into the platen lever assembly and attach to the release lever
shaft with one E-ring.
32. Attach the guide roller shaft and sub paper hold roller to the paper feed frame assembly
with two E-rings.
Figure 2-39
609
Screw (C.B.P-tite, 3X6)
676
Cover ground plate
669
Paper feed frame cover
609
Screw (C.B.P-tite, 3X6)
641 Guide roller shaft
720
E-ring (2)
663
Sub paper hold roller
719
E-ring (1.5)
657 Paper release lever
638 Release lever shaft
720
E-ring (2)
663 Sub paper hold roller
To Next Page
Loading...
