Epson TM-U675 - Page 93

Rev.D Assembly and Disassembly 2-59
TM-U675/U675P (with autocutter) Service Manual
Confidential
8. Attach the lever drive shaft assembly to the main frame. Insert the D cut side of the lever
drive shaft assembly to the left and attach to the main frame.
9. Insert the crank shaft holders from the left and right outer sides and attach with one E-ring.
Figure 2-59
730 Crank shaft holder
730 Crank shaft holder
693
Lever drive shaft assembly
723 E-ring (5)