Epson TM-U675 - Page 99

Rev.D Assembly and Disassembly 2-65
TM-U675/U675P (with autocutter) Service Manual
Confidential
26. Insert the sub slip hold sleeve onto both ends of the shaft for the sub slip hold rollers.
27. Temporarily attach the front frame and the slip guide upper frame. When doing so, align the
nibs shown in the illustration with the nib holes.
28. Temporarily attach the sub slip hold roller so that the D cut side is on the right side.
Figure 2-65
661 Slip guide upper frame
667 Sub slip hold roller
613 Front frame
770
Sub slip
hold sleeve
770
Sub slip hold sleeve
Nib
Nib
Hole
Hole