253
Setting Options Description
Distinctive Ring All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so
your product can receive faxes on the correct
number of rings. Select All for phones lines that do
not use this service.
Single
Double
Triple
Double&Triple
Rings to Answer 1 to 9 Sets the number of rings before your product
receives a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product,
make sure this setting is set higher than the number
of rings your answering machine is set to answer a
call.
Remote Receive Off Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you select On, you must also
set a Start Code. If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
On
Start Code
Rejection Fax Various Lets you automatically reject faxes from blocked
numbers, with blank headers, or from unrecognized
contacts.
Receiving Paper Size Various Selects the paper size for incoming faxes.
Save/Forward File
Format
PDF Saves or forwards a fax as a PDF file. You can also
set a password for opening the PDF or allowing
printing and editing permissions.
TIFF Saves or forwards a fax as a TIFF file.
Parent topic: Selecting Advanced Fax Settings
Related tasks
Selecting the Date and Time
Starting a Scan Using the Product Control Panel
To Next Page
Loading...
Need help?
General
