343
Note: Do not turn off the product while charging or you will waste ink.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with
the label facing up; do not store cartridges upside-down.
Parent topic: Replacing Ink Cartridges and Maintenance Boxes
Related concepts
Purchase Epson Ink Cartridges and Maintenance Box (U.S. and Canada)
Purchase Epson Ink Cartridges and Maintenance Box (Latin America)
Replacing the Maintenance Box
If the maintenance box is full, a message appears on your product's LCD screen. Select How To and
follow the steps on the LCD screen to replace the maintenance box.
Make sure you have the replacement maintenance box handy before you begin.
Caution: Do not reuse a maintenance box that has been removed and left uninstalled for more than a
week. Keep the maintenance box away from direct sunlight.
1. Open the front cover (L).
2. Push the maintenance box cover (H) tab and open the cover.
3. Pull the maintenance box all the way out.
Note: Do not tilt the used maintenance box or take it apart.
Caution: Be careful when removing the maintenance box; ink may leak when it is pulled out.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.
Keep the maintenance box out of the reach of children and do not drink the ink.
To Next Page
Loading...
Need help?
General
