362
Code Condition/solution
001 The product was turned off by a power failure.
101 Memory is full. Reduce the size of the print job.
102 Collated printing has failed due to a lack of available memory. Reduce the size of the print
job or print one copy at a time.
103 Print quality was decreased due to a lack of available memory. If the quality of the printout
is unacceptable, try simplifying the page by reducing the number of graphics or the
number and size of the fonts.
104
131
Reverse order printing has failed due to a lack of available memory. Reduce the size of
the print job.
106 Cannot print from the computer due to access control settings. Contact your product
administrator.
107 User authentication failed and the job has been canceled. Contact your product
administrator.
108 Confidential job data was deleted when the product was turned off.
109 The received fax was already deleted (models equipped with optional fax board).
110 The job was printed 1-sided because the loaded paper does not support 2-sided printing.
111 Available memory is running low. Reduce the size of the print job.
120 Cannot communicate with a server using an open platform. Check the server or network
for errors.
130 Collated printing has failed due to a lack of available memory. Reduce the size of the print
job or change the collate settings.
132 Cannot print due to a lack of available memory. Reduce the size of the print job.
133 Cannot print 2-sided due to a lack of available memory. Only one side will print. Reduce
the size of the print job.
141 HDD error. The job is canceled. Contact Epson for support.
151 Cannot print because the user name associated with the confidential job does not match.
201 The product's memory is full. You can send pages individually, or print received faxes and
delete them to free up memory space (models equipped with optional fax board).
To Next Page
Loading...
Need help?
General
