60
You see a screen like this:
3. Select Router.
4. Select Start Setup.
5. Select Wi-Fi Setup.
6. Select Push Button Setup (WPS).
7. Follow the instructions on the LCD screen to complete WPS setup.
8. Press the home button to exit.
You see the icon on the LCD screen and should be able to connect to your product directly
from your computer or device, and then print. If you are printing from a computer, make sure you
installed the network software from the Epson website.
Note: If you don't see the icon, repeat these steps to try again.
Parent topic: Wi-Fi Protected Setup (WPS)
To Next Page
Loading...
