Epson WorkForce WF-2910 Series User Manual

The size of the paper is set incorrectly.
Solutions
Select the appropriate paper size setting.
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
e following causes can be considered.
The paper path is dirty.
Solutions
Load and eject paper without printing to clean the paper path.
& “Cleaning the Paper Path for Ink Smears” on page 104
There is dust or dirt on the originals or the scanner glass.
Solutions
Remove any dust or dirt that adheres to the originals, and clean the scanner glass.
& “Cleaning the Scanner Glass” on page 105
There is dust or dirt on the ADF or originals.
Solutions
Clean the ADF, and remove any dust or dirt that adheres to the originals.
& “Cleaning the ADF” on page 106
The original was pressed with too much force.
Solutions
If you press with too much force, blurring, smudges, and spots may occur.
Do not press with too much force on the original or the document cover.
The copy density setting is too high.
Solutions
Lower the copy density setting.
& “More Menu Options for Copying” on page 61
Solving Problems > Printing, Copying, Scanning, and Faxing Quality is Poor > Copy Quality is Poor
168

Epson WorkForce WF-2910 Series Specifications

General

Print Technology	Inkjet
Functions	Print, copy, scan, fax
Display	1.44" color LCD
Connectivity	USB, Wi-Fi
Paper Handling	100-sheet input tray
Compatible Ink	Epson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)	10 pages per minute
Print Speed (Color)	5 ppm (ISO)
Mobile Printing	Apple AirPrint
Paper Sizes	A4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges	4 individual cartridges
Print Resolution	5760 x 1440 optimized dpi