Epson WorkForce WF-2910 Series - Page 220

Header:
Enter your sender name and fax number. ese appear as a header on outgoing faxes.
Your Phone Number:
You can enter up to 20 characters using 0-9 + or space.
Fax Header:
You can register up to 21 sender names as necessary. You can enter up to 40 characters for each
sender name. For Web Cong, enter the header in Unicode (UTF-8).
Receive Mode:
Select the receive mode. For details, see the related Information below.
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. e distinctive ring service, oered by many telephone
companies (the service name diers by company), allows you to have several phone numbers on one
phone line. Each number is assigned dierent ring pattern. You can use one number for voice calls
and another for fax calls. Depending on the region, this option may be On or O.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive:
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Enter Start Code:
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax:
Select options to reject receiving junk faxes.
Rejection Number List:
If the other party's phone number is in the rejection number list, set whether to reject
the incoming faxes.
Fax Header Blank:
If the other party's phone number is blocked, set whether to reject receiving the faxes.
Caller not in Contacts:
If the other party's phone number is not in the contacts, set whether to reject receiving
the faxes.
Product Information > Settings Menu List > Fax Settings
220