Accumulated Fuel
Description
The injected fuel amount is accumulated in the eSID.
The first parameter is the injected fuel this driving cycle. A new driving cycle is started when key has
been removed from the Ignition, inserted again and the engine started. This means that the value is
saved the next time the driver enters the vehicle but doesn’t start the engine. This parameter cannot
be manually reset.
The second parameter is the total accumulated injected fuel since eSID3 was inserted or last reset.
Enable Criteria
All Vehicles
Units
Liters
Gallons (UK, US)
User Inputs
SET – Reset the total accumulated injected fuel.
To Next Page
Loading...