eSID 3 - Turbo Boost Pressure

www.esid.se
Page:
33 / 93
Name of document:
eSID3 User Guide
Version:
2.0
Turbo Boost Pressure
Description
The Engine Control Module measures the boost pressure using a pressure sensor. Depending on the
position and the type of sensor, eSID can show pressure and vacuum, or only positive pressure.
The maximum pressure registered by the eSID is also shown.
Criteria
 All Turbo vehicles
Units
 Pressure (bar/psi)
 Vacuum (bar/psi/InHg)
User Inputs
 SET – Reset the maximum value