eSID 3 - Digital Input Switch Configuration

www.esid.se
Page:
92 / 93
Name of document:
eSID3 User Guide
Version:
2.0
Digital Input Switch Configuration
(Only SW SG1.1.x and newer)
Description
eSID reads the digital input switch and can use it as an TCS/ESP Off Switch (like MY2003-2007).
Enable Criteria
 All Vehicles
Configuration Options
Digital Input Switch Configuration
Value
Disabled
0
eSID uses the Switch as an TCS/ESP Switch (like on MY2003-2007)
Note: Extra wiring is needed in the case, see earlier in this manual.
1
User Inputs
 SET – Enter or Exit Edit mode (***)
 INFO UP/DN – Change Setting in Edit mode.