Vehicle Group
Distance
Description
The vehicle distance is accumulated in the eSID.
The first parameter is the distance this driving cycle. A new driving cycle is started when key has been
removed from the Ignition, inserted again and the vehicle starts to move. This means that the value
is still saved the next time the driver enters the vehicle and only starts the engine without driving
away. This parameter cannot be manually reset.
The second parameter is the total accumulated distance since eSID3 was inserted or last reset.
Enable Criteria
All Vehicles
Units
Distance (Km, Miles)
User Inputs
SET – Reset the total accumulated distance.
To Next Page
Loading...