Automatic Fog light activation
This function activates the front fog-lights automatically when turning the Main Light Switch to Park
position or/and when activating the main beam. This is configurable in eSID Settings.
Normally the driver needs to manually switch the light switch to ”Park” and then press the fog light
switch. The eSID3 helps with the activation so the driver only needs to turn the light switch to ”Park”.
Note: This function is not possible on US/CA/MX vehicles.
Automatic Hazard activation
This function activates the hazard light automatically if the driver does a hard deceleration a.k.a.
“panic brake”.
Every time the brake pedal is pressed and the speed is greater than 30 km/h, the retardation is
calculated and if it is greater than a defined threshold the car will automatically activate the hazard
lights.
The hazard lights will be deactivated when the accelerator pedal is pressed more than 25% or any
turn indicator is activated.
Note: This function is deactivated if braking starts below 30 km/h or if any turn indicator is activate.
To Next Page
Loading...