eSID 3 - Drive Time Monitoring

www.esid.se
Page:
53 / 93
Name of document:
eSID3 User Guide
Version:
2.0
Drive time
Description
This view shows the driving time this driving cycle or since last reset. A new driving cycle is started
when key has been removed from the Ignition, inserted again and the vehicle starts to move. This
means it will not reset if the engine is turned off but key is never removed from the ignition switch.
Enable Criteria
 All Vehicles
Units
 Hour
 Minutes
User Inputs
 SET – Manually reset the driving time.