Fuel/Distance Correction Factor
Description
The correction factors are used to compensate the incoming fuel and distance inputs for instance
when comparing the fuel fill-up station with the eSID3 value and it differs 1%, then the correction
factor can be changed to 1.010 (eSID3 shows 1% more) or 0.990 (eSID3 shows 1% less).
Enable Criteria
All Vehicles
Configuration Options
+/- 20% in steps of 0.1%
User Inputs
SET – Enter or Exit Edit mode (***)
INFO UP/DN – Change Setting in Edit mode.
To Next Page
Loading...