ETAS MDA V8 - Page 140

10 Appendix | 140
What MDA V7 Migrated formula in MDA V8 Comment
PhaseShift PhaseShift (signal, 0,
count)
Delay (signal, 0, count) Returns a previous value:
signal(k-count)
Time range defined by sample parameter
count.
MDA V8 returns n/a as long as not all values
are defined.
Pulse11 Pulse11 (time, signal,
duration)
Debounce (time, signal, 0,
duration)
Time range defined by the parameter dur-
ation.
Detects pulses given by the argument dur-
ation.
MDA V8 assumes that the previous
(unknown) values are the same as the first
available sample.
RollingAverage RollingAverage
(signal, count)
Accumulate_Samples_Average (signal,
count)
Calculates the average of signal over the num-
ber of samples defined by count.
Time range defined by sample parameter
count.
RSFlipFlop RSFlipFlop (set_input,
reset_input)
State_RSFlipFlop (set_input,
reset_input)
Time range: From start
RSFlipFlop with positive logic.
Both parameters must have the same meas-
ure rate.
MDA V8 | User Guide