5 Layers and Instruments | 72
1. If you want to show the complete value range of both signals in a strip,
right-click its axis.
2. Select Zoom Both Signals to Complete Value Range.
5.2.3.3 Using Strips
You can perform the following actions:
"To reorder strips" below
"To delete a strip" below
To reorder strips
1. Click on the strip.
A blue bar occurs on the left and right edge of the strip.
2. To move the selected strip, do one of the following:
l
To move the strip up, press ALT+PAGE UP.
To move the strip down, press ALT+PAGE DOWN.
or
l
Click on one of those bars and pull it up or down to the desired position.
The new position of the floating strip is indicated by a small blue rect-
angle.
To delete a strip
1. Open the context menu of the strip that you want to delete.
2. Select Delete strip.
5.2.3.4 Using Axes
You can perform the following actions:
"To use a y-axis as x-axis" below
"To scroll axes" on the next page
"To zoom axes" on the next page
"To adjust the axis range or set a favorite axis range" on the next page
To use a y-axis as x-axis
1. Right-click the y-axis that you want to use as x-axis.
2. Select Use as X-axis.
The x-axis and y-axis including their ranges are swapped.
MDA V8 | User Guide
To Next Page
Loading...
