ETAS Glossary
N
No-Match status
Status of signals that are not contained in a measure file, e.g., after
replacing the measure file. In this case, no measure data can be dis-
played.
O
Oscilloscope
Instrument type for displaying graphically the course of signals over
time.
P
Properties
View used for setting and maintaining the appearance and behavior
of the instrument and axes properties.
Q
Quick access toolbar
Toolbar that contains a set of commonly used commands. By
default, it is located in the upper left-hand corner.
R
Raster
Time interval between the individual samples, given in ms.
Ribbon
Set of toolbars located on different tabs.
S
Sample
Individual value of a signal measured at a certain timestamp.
Sample marker
Graphical elements which appear when individual measured value
can be differentiated in an oscilloscope.
Scatter Plot
Instrument type displaying values for typically two variables for a set
of data. The data is displayed as a collection of not connected points
in order to detect correlation of signals or value distribution.
MDA V8 | User Guide 149
To Next Page
Loading...
