4.1.7 Importing Calculated Signals via XCS Export File 32
4.1.8 Adding Configuration Comments 33
4.2 Maintaining Measure Files 33
4.2.1 Adding, Replacing, and Removing Measure Files 33
4.2.2 Defining a Time Offset for a Measure File 37
4.2.3 Measure File Comment and Other Meta Information 38
4.2.4 Indication of File Index Status 39
4.3 Exporting and Converting Measure Data 39
4.4 Defining Variable Name Display 42
4.5 Handling of Special Files 44
4.5.1 Using Label Files (LAB) 44
4.5.2 Loading a Bus Trace File (BLF) 45
4.5.3 Extracting Measure File Attachments 45
4.5.4 Using Calibration Data Exchange Files (CDF) 46
5 Layers and Instruments 47
5.1 Layers 47
5.1.1 Using Layers 47
5.1.2 Displaying Previews 49
5.2 Instruments 50
5.2.1 Maintaining Instruments 52
5.2.2 Oscilloscope 53
5.2.2.1 Oscilloscope's Toolbar 54
5.2.2.2 Adjusting the Signal List 55
5.2.2.3 Zooming 56
5.2.2.4 Using Strips 57
5.2.2.5 Using Axes 60
5.2.2.6 Basic Navigation 64
5.2.2.7 Using Cursors 64
5.2.2.8 Adjusting Signals 68
5.2.2.9 Creating a Bound in a Strip 70
5.2.3 Scatter Plot 70
5.2.3.1 Adjusting Signals 71
5.2.3.2 Zooming 71
5.2.3.3 Using Strips 72
5.2.3.4 Using Axes 72
5.2.3.5 Using Cursors 73
5.2.3.6 Using Bounds 74
5.2.4 Table 76
5.2.5 Statistical Data 79
MDA V8 | User Guide
Contents | 4
To Next Page
Loading...
Need help?
General
