5 Layers and Instruments | 92
3. Enlarge or reduce the visible time range by dragging the double arrow.
When you zoom in very deep, the complete time range cannot be displayed
anymore. An additional area appears showing a magnified section of the
time range .
To perform a fast zooming
1. The magnified section of the time range must be displayed (see "To zoom"
on the previous page). Move the cursor to the left or right edge of the cur-
rently visible time range .
The cursor changes into a double arrow.
2. If you want to perform a symmetric zoom operation, press CTRL.
3. While keeping the mouse button pressed, move the cursor to the desired
position.
The faster you move the cursor, the faster is the zooming performed.
To show the full time range of the measure file
1. Move the cursor to the left or right edge of the currently visible time range
.
The cursor changes into a double arrow.
2. Double-click.
The time range is expanded to the left or right boundary respectively.
3. If you press CTRL in advance, the time range is expanded for both bound-
aries simultaneously.
MDA V8 | User Guide
To Next Page
Loading...
