Working with a Single Cue List 245
Pressing [Label], when a label has already been applied to a cue, will display the label on the com-
mand line for editing. Pressing [Label] a second time will clear the label, or you can press [Clear] to
remove the label one character at a time.
Cue Notes
Cues can have notes attached to them.
These notes can be viewed in the Playback Status Display and the Cue List Index by hovering a mouse
over or tapping on the + in the Label column.
To add a note to a cue:
[Cue] [n] {Attributes} {Notes}
To add a note to the currently selected cue, you can use [Shift] + [Label].
You can use the virtual alphanumeric keyboard or an external keyboard to enter the desired text.
See Playback Status Display Configuration (on page63) for additional display options.
See Copy To and Move To for Labels, Scenes, and Notes (on page281) for more information.
Scenes
Scenes are a cue organization tool that provide a visual identifier for breaks in your show. Scenes
allow for quick cue list navigation without needing to remember a cue's number.
Scenes display in the cue list index and the playback status display as a green bar above the cue they
are associated with in the list. An end of scene can also be created, and those display as a green bar
under their associated cue.
To Next Page
Loading...
Need help?
General
