34 Ion Operations Manual
To access the second page of softkeys, press the [More SK] button. To access the previous softkeys,
press [More SK] again.
Displays
There are several terms that are useful to know when discussing the displays on your console:
Monitors - refers to any physical monitor or touchscreen device connected to your console.
The monitor number will display in the upper left corner of the screen.
Workspaces - offers independent display control on all of your connected monitors. Every
monitor can have up to three workspaces.
Frames - offers layout options to your workspaces.
Tabs - offers the ability to view multiple displays in one frame.
Displays - are the individual views or tools available for use in programming your console. They
are viewed in tabs.
Ion has the ability to have one of three different workspaces active on individual monitors, as well as
to have up to four frames in use in any workspace. Each frame can hold multiple tabs. Each tab con-
tains one display.
Workspaces
Workspaces offer independent display control on all of your connected monitors. Every monitor can
have up to three workspaces, identified by the workspace icons in the upper left corner of any mon-
itor.
You can use [Tab] & [Page ▲] and [Tab] & [Page ▼ ]to cycle through the workspaces. This will incre-
ment or decrement the current workspace and will then force all of the other workspaces to match
the current workspace’s number (1, 2, or 3). This is so you can quickly step through the workspaces.
To Next Page
Loading...
