354 Ion Operations Manual
[Sub] [2] [Copy To] [Sub 9] [Enter][Enter] - copies the contents, label, and timing data from sub-
master 2 and places it in submaster 9.
[Sub] [2] [Copy To] [Sub 9] {Attrs Only} [Enter][Enter] - copies all of the submaster properties
from submaster 2 and places it in submaster 9. Levels, effects, and labels are not copied when
using the {Attrs Only} softkey.
[Sub] [2] [Copy To] [Sub 9] {Labels Only} [Enter][Enter] - copies only the label from submaster 2
and places it in submaster 9.
Releasing Content From a Submaster
To release content from a submaster, use one of the following methods:
[Fader Control] {Off} & [Load]- stops any running effects and fades out according to the
{Restore} mode of the submaster.
[Fader Control] {Release} & [Load] - behaves in the same way as {Off}. {Release} no longer
unmaps the fader.
[Shift] & [Load] - behaves like {Off} and {Release} except that it will also unmap the fader.
Updating a Submaster
It is possible to make changes to a submaster in Live mode. [Update] is used to store changes to a
submaster.
[Update] [Sub] [5] [Enter] - updates submaster 5 to include changes in live output only for
channels already in submaster 5. You can also press the bump button for submaster 5 to
select it.
[Channel list] [Update] [Sub] [5] [Enter] - adds only the specified channels to submaster 5.
Deleting a Submaster
You can delete a submaster using the [Delete] key. When a submaster is deleted, the fader remains
configured as a submaster, but it will be empty, unless the {Unmap Faders} softkey is used.
[Delete] [Sub] [5] [Enter] [Enter] - deletes the contents of submaster 5.
[Delete] [Sub] [5] {Unmap Faders}[Enter] [Enter] - deletes the contents of submaster 5 and
unmaps any faders that are currently mapped to submaster 5.
To Next Page
Loading...
