NAV IP Access controller
67
2) Selecttherelevantcolumnnamecorrespondstothevalue.
3) Click“Import”buttonandaddcompleted.
7.1.4SetupDepartemntandCardholder
7.1.4.1 Set Department
Clickonthemenubar“System”“Cardholder”“DepartmentSetting”,entertoDepartmentSetting
page.Here’showtoaddanewdepartment(Detailsees9.1.1Adddepartment).
Steps：
1) Clickthe“Add”button.
2) Filloutdepartmentname
3) Selecttheparentdepartment
4) Click“save”andsettingcompleted.
7.1.4.2 Add Card Holder
Click on the menu bar “System” “Cardholder” “Cardholder Setting”, enter to Cardholder Setting
page.Here’showtoaddacardholder(Detailsees9.2.1).
Step：
1) Clickthe“Add”button,pop‐upapagetoaddcardholder.
2) Filloutemployeenumber,name,department,andotherinformation,upload
photos.
3) Herecanaddanewcardtothecardholder.
4) Click“Save”buttonandcompleted.
7.1.5ConfigurationandAttendance
7.1.5.1 Set Attendance Time
Clickonthemenubar“Attendance”“BasicSetting”.Selectamenufordifferentattendancedaytype.
Bellowishowtoeditadaytype(Detailsettingpleasesees16.1).
Steps：
1) Selectadaytypemenu,entertothepage.
2) Selectadepartmentandedit.
3) Clickthe“Save”button.
7.1.5.2 No-Access-Attendance
Click on the menu bar “Attendance” “Attendance Exception” “No‐Access‐Attendance”. Below is
howtoaddano‐access‐attendanceenrollmentforacardholder(Detailpleasesees17.1.1).
To Next Page
Loading...