Evolis Avansia User Manual

13
ä
Changing the ink ribbon
Before changing the ink ribbon you have to know about the Evolis electronic key which is delivered with every color ribbon.
Ê
You will have to install the ribbon rst and then install the key inside the printer as demonstrated below.
Ë
The electronic key is equipped with a RFID tag which communicates with an electronic board inside the printer. Without
this key, the printer will not print.
When installing the electronic key, the Avansia printer instantly identies the type of ribbon without user intervention. The process is
automated from end to end.
With this recognition system you will know exactly how much of the ribbon capacity is remaining, as this
information is readily available from the Printer Driver on the PC.
Similarly, when the ribbon is nearing its end, an alert is displayed on-screen. This helps in estimating the subsequent
print jobs possible, and you can ensure not running out of ribbon during the card personalization process.
1
Ê Ë

Evolis Avansia Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Polycarbonate, PVC, PVC Composite
Print technology	Dye-sublimation/Resin Thermal transfer
Print speed (color)	144 card/h
Card thickness (min)	0.76 mm
Duplex print speed (color)	96 card/h
Display	LCD
Lamination	-
Certification	CE, FCC, UL, IEC RoHS
Product color	Black, White
Internal memory	64 MB
Cable lock slot type	Kensington
Total input capacity	250 sheets
Wi-Fi	No
Security algorithms	IPSEC
Ethernet interface type	Fast Ethernet
Bundled software	cardPresso XXS
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	297 mm
Width	340 mm
Height	436 mm
Weight	20000 g