Evolis Avansia - 3-3 Servicing the Cleaning Roller(s)

35
3-3 Servicing the cleaning roller(s)
The cleaning roller(s) remove(s) any dust or particles from the cards before printing.
Recommended cleaning cycle: when cards are printed with missing colors or if there are foreign objects on
them.
Follow the procedure below:
Ê
Turn off the power.
Ë
Open the front cover
Ì
Remove the cleaning tape cassette (blue part), hold the cleaning tape cassette handle, lift it and pull.
Í
Remove the cleaning roller (black part).
Î
Wipe the rollers clean with a soft cloth fully moistened with water .
Ï
Load rst the cleaning roller (black part) and then the cleaning tape cassette (blue part).
Ð
Close the front cover. Your printer is once again ready to use.
Wait for 2 minutes after cleaning before using your printer.
3
Ì Í ÎË