Evolis Avansia - 3-7 Primary Transfer Feeding Roller Cleaning

40
Ê Ì ÍË
Î
Ï
3-7 Primary transfer feeding roller cleaning
Recommended cleaning cycle: If a lm-related error occurs such as [Film Wind Up], or there is color bleed or
image distortion, then clean the primary transfer feeding roller
Ê
Turn off the power.
Ë
Open the top cover and remove the card feeder
Ì
Open the front cover.
Í
Remove the ink ribbon cassette and the Transfer lm.
Î
Insert a at screwdriver into the groove on the end of the feeding roller.
Ï
Turn the screwdriver, and wipe the feeding roller inside the printer using an Evolis cotton swab.
Ð
Return the ink ribbon cassette and the Transfer lm cassette to their original positions.
Ñ
Close the front cover.
Wait for 2 minutes after cleaning before using your printer.
3
Flat Screwdriver
Fe
eding Roller
Cotton
Swab