Evolis Avansia User Manual

5
1-2 Operating the printer safely
The following precautions must be observed to assure safe operation of the printer. Also, do not do anything that is not described in this
manual. Doing so may cause an unexpected accident.
ä
Installing location
Do not install the printer:
l
in a damp or dusty location
l
on an unstable table, on a slant, or any place where there is excessive vibration.
l
in a location susceptible to rapid uctuations in temperature.
l
in a location exposed to direct sunlight.
l
near ammable or explosive materials or heater, stove or other device that produces heat
Place the printer away from walls to maintain air ow. Also, maintain at least 30cm (12") of open space above the printer and at least
15cm (6") on each side on the printer.
Blocking the vents may cause the printer to overheat and catch re.
ä
Power supply
l Use a dedicated power cable and do not use an extension cord with multiple outlets.
l Be sure to remove any dust from the plug and outlet. Humidity produces a micro-current on the surface causing overheating or re.
l Do not damage or modify the Power Cable. Also, do not place heavy objects, pull, or bend excessively.
l Do not plug in or unplug the Power Cable if your hands are wet.
l Ensure a ground wire is connected. When connecting the ground wire, note the following cautions:
l
Recommended connections for ground wires.
- Outlet ground terminal
- Ground terminals installed as type A, B, or C
- A copper rod 65cm (26") or longer buried in the ground.
l
Not permitted for ground wires
- Gas piping (risk of re or explosion.)
- Water pipes or taps (water pipes that include plastic piping cannot act as a ground. However, if a water pipe is
congured to act as a ground, then connection of a ground wire is permitted.)
- Telephone line ground wires or lightning conductors (danger of high current ow in the event of a lightening
strike.)
l Be sure to turn off the power and unplug the plug from the outlet before moving the printer.
l Pull on the plug, not the cable, when unplugging it from an outlet.
l Do not use an under-rated extension cord.
1

Evolis Avansia Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Polycarbonate, PVC, PVC Composite
Print technology	Dye-sublimation/Resin Thermal transfer
Print speed (color)	144 card/h
Card thickness (min)	0.76 mm
Duplex print speed (color)	96 card/h
Display	LCD
Lamination	-
Certification	CE, FCC, UL, IEC RoHS
Product color	Black, White
Internal memory	64 MB
Cable lock slot type	Kensington
Total input capacity	250 sheets
Wi-Fi	No
Security algorithms	IPSEC
Ethernet interface type	Fast Ethernet
Bundled software	cardPresso XXS
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	297 mm
Width	340 mm
Height	436 mm
Weight	20000 g