Evolis Avansia User Manual

23
ä
Optimizing transfer conditions
In order to optimize the transfer quality you can change the Retransfer settings according to your card type.
Thanks to the LCD Panel or the printer driver you can select the card type, then the transfer speed and the transfer temperature.
Ê
Switch from Normal Mode to User Mode (see section 4-1b).
Ë
Press the Key until [Card Setup] is displayed. Press the SET Key.
Ì
Confirm that [Card Type] appears. Press the SET Key.
Í
Change the settings by using the t/s Keys:
PVC (0.76mm)
PET(0.76mm)
PET-G -0.76mm)
If [CARD 1-3] is selected, use the t/s Keys and the SET Key to select the transfer speed and transfer temperature:
l left value: transfer speed.
The higher the value, the higher the transfer speed is fast.
l Right value: transfer temperature.
The higher the value, the higher the transfer temperature is hot.
The factory default setting is [PVC 30mil/0.76].
The factory default transfer speed for [CARD 1-3] is set to [35mm/s].
1

Evolis Avansia Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Polycarbonate, PVC, PVC Composite
Print technology	Dye-sublimation/Resin Thermal transfer
Print speed (color)	144 card/h
Card thickness (min)	0.76 mm
Duplex print speed (color)	96 card/h
Display	LCD
Lamination	-
Certification	CE, FCC, UL, IEC RoHS
Product color	Black, White
Internal memory	64 MB
Cable lock slot type	Kensington
Total input capacity	250 sheets
Wi-Fi	No
Security algorithms	IPSEC
Ethernet interface type	Fast Ethernet
Bundled software	cardPresso XXS
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	297 mm
Width	340 mm
Height	436 mm
Weight	20000 g