6
ä
Handling
Do not use ammable sprays near the printer.
Do not touch anything inside the printer unless specied in this manual.
Do not place heavy items on the printer and do not lean on the printer.
While the printer is operating do not turn off the printer, unplung the power cable, or look inside the printer.
The cooling fan is always running for cooling the inside of the printer. This is not a malfunction.
The printer may cause static, ickering or interrupt reception or televisions or radios if they are too close to the
printer.
The lower part of the Top Cover, the printer internal heat roller section, and the thermal head section get very
hot. Ensure you do not touch these three locations.
ä
Security cable
You can prevent theft of the printer by locking it with a wire cable. Use a wire cable that ts the Security cable Slot (0.12’’x0.28’’
(3.00mm x 7.00mm)) to lock up the printer.
1