34
Ï
When [Remove cards] is diplayed, open the top cover.
Ð
Open the cards feeder and remove the cards from the cassette.
Ñ
When [Set Cleaning Crd] is displayed, load the cleaning card in the feeding slot. Align the adhesive side of the cleaning
card to the right.
Ò
Close the cards feeder and the top cover.
Ó
When [SET:Start] is displayed, press the SET Key. The cleaning starts automatically.
When [Complete] is diplayed, cleaning is completed and the cleaning card is ejected into the cards ejection slot.
Put the lm back in the Retransfer module. Your printer is once again ready to use.
3
Ï Ð Ñ
Ó
The adhesive side is
on the rear surface
Cleaning
SET:Start
Cleaning... Complete
SET
To Next Page
Loading...
