Evolis Avansia - Page 33

33
Follow the procedure below:
Ê
Switch from Normal Mode to User mode (see section 4-1b).
Ë
Press the t Key until [Cleaning] is displayed, then press the SET Key.
Ì
Then [Cool down...] is diplayed, wait until the gure drops to 70 or lower. The gure indicates the temperature of the
heat roller.
Í
When [Remove Film] is displayed, open the front cover.
Î
Remove the Transfer film and close the front cover.
3
Ê Ë Ì
Í
Î
Ready Ready
Printer Info.
SET:
>>
Printer Info.
SET:
>>
MENU
Normal Mode User Mode
Printer Info.
SET:>>
Printer Info.
SET:>>
Cleaning
SET:>>
Cleaning
SET:>>
Cleaning
Remove Cards
Cleaning
Remove Cards
SET
Cleaning
Cool Down 75
Cleaning
Cool Down 70