Evolis Avansia - Page 16

16
Ï
Take up the Transfer lm slack. Turn the wheel at right and take up the lm slack.
Ð
Insert the Transfer lm cassette into the printer until a click is heard.
Ñ
Close the front cover.
Ò
Press the SET key when [Push SET Key] appears on the LCD.
When placing the Transfer lm down, prevent contamination adhering by placing it with the handle of the
bottom.
If the lm is cut, carefully trim the cut section with scissors. Use cellophane tape to join the lm. Then go back to
step
Î
page 15.
1
Ò
Ï Ð Ñ