Evolis Avansia - 2-2 Managing Print Settings

26
2-2 Managing the print settings
Before using your printer, it is essential to check and/or change the default print driver settings:
l Card orientation
l Single or dual sided printing
l Card nish or treatment
l …
You will nd more detailed information about the cards recommended by Evolis in the Evolis High Trust
®
list of
consumables.
Pay attention to the settings dened under the print driver Properties and do not hesitate to contact your Evolis
reseller for any advice and assistance needed before making any changes.
These print settings are accessible:
l From the Start button found bottom-left on the Windows task bar, select Printers and faxes.
l Select your printer and double click.
l From the Printer menu, select Properties.
l The rst properties conguration screen for the equipment then appears.
l The main tabs used to dene the settings are “Card”, “Graphics”, “Conguration” and “Maintenance”.
2