Primacy Service Manual
6 / 61
Safety
The following basic safety tips are given to ensure safe installation, operation, and maintenance of
EVOLIS equipment and are not to be considered as comprehensive on matters of safety. The tests
performed demonstrate the safety and reliability of heating components when used correctly. It is
necessary that the operator be informed of precautionary regulations aimed at avoiding injury or
damage to the equipment.
Safe Environment
Connect equipment to a grounded facility power source. Do not defeat or bypass the ground
lead.
Place the equipment on a stable surface, and ensure that the floors in the work area are dry and
non-slip. Insulated rubber floor mats are preferred.
Know the location of equipment branch circuit interrupters or circuit breakers and how to turn
them on and off in case of emergency.
Know the location of fire extinguishers and how to use them. Use only ABC type extinguishers on
electrical fires.
Know local procedures for first aid and emergency assistance at the customer facility.
Use adequate lighting at the equipment.
Maintain the recommended range of temperature and humidity in equipment area.
Do not use this product in an environment containing volatile or flammable compounds.
Safe Human Interface
Use proper lifting techniques when moving or installing the equipment.
Use standard electrostatic discharge (ESD) precautions when working on or near electrical
circuits.
Do not defeat or disconnect safety interlocks on covers.
To Next Page
Loading...
Need help?
General
